ST27 Compact Track Loader
The ST27 offers a compact design, outstanding visibility and operator comfort features that make it a perfect fit for any job. The trim package, low weight and ability to lift heavier loads, compared to similar machines in this class, make it especially productive for smaller job sites. The ST27 is powered by a Kohler turbocharged engine offering high horsepower, superior torque and large fuel capacity to operate longer and get more done. The vertical lift arms allow excellent lift and dump height for maximum efficiency and flexibility on the job site.
| Ground Pressure(Standard track | 4.4 psi |
| Break Out Force Bucket | 5,404.2 lbf |
| Break Out Force Lift Arm | 4,783.3 lbf |
| Tractive Effort max. | 7,476.9 lbf |
| Bucket Roll Back | 2.1 s |
| Bucket Roll Out | 2.2 s |
| Lift Arm Raise | 3.3 s |
| Lift arm lower | 2.8 s |
| Travel speed stage 1 | 6.4 m/H |
| Travel speed stage 2 | 9.1 m/H |
| Length without Bucket | 102.5 " |
| Length with Bucket | 132.4 " |
| Overall width without bucket | 60 " |
| Height to top of ROPS | 79.8 " |
| Bucket Hinge Pin Height | 119.9 " |
| Bucket roll back at ground | 30 ° |
| Bucket roll back at height max | 95 ° |
| Angle of departure | 29 ° |
| Bucket height at height max. | 155.3 " |
| Buck. dump angle at height max | 37 ° |
| Operating weight | 7,350.2 lb |
| Track width | 12.6 " |
| Ground clearance | 8.5 " |
| Length of Track on Ground | 53.1 " |
| Dump reach at max. height | 39.1 " |
| Cylinder | 4 |
| Oil filling max. | 2.5 gal US |
| Power rating max. | 74 hp |
| Operating Engine speed | 2,600 1/min |
| Starter battery Voltage | 12 V |
| Engine Manufacturer | Kohler |
| Engine Designation | KDI2504TCR |
| Flow rate | 19.3 gal/mi |
| Flow rate max. | 28.8 gal/mi |
| Auxiliary relief pressure | 3,480 psi |
| Cooling fluid volume | 13.7 qt US |
| Hydraulic fluid volume | 30.6 qt US |
| Fuel Tank capacity | 27.2 gal US |
| Tip Load | 5,599.7 lb |
| Rated Operating Capacity at 35% Tip Load | 1,889.4 lb |
